Gas chromatograph Trace-2000 and UniChrom
			 
			  Gas chromatographs "Trace-2000" is among the top 
			  GC systems on world market. 
			  
				 
				     
				   | 
				   Producer: Thermo 
					Finnigan Inc. 
					Highlights
					
					  - Up to three detectors can be installed simultaneously
 
					  - Up to two inlets can work simultaneously.
 
					  - Electronic flow and pressure controller for inlets
 
					  - Inlet carrier gas program can be in flow or pressure 
						mode.
 
					  - High pressure / flow programming rates.
 
					  - Electronic flow control for detectors gases.
 
					  - Data sampling rate from 10 to 300 Hz for each of 3 channels. 
					  
 
					  - Full configuration of the instrument from the keyboard. 
					  
 
					  - High heating speed for oven, injectors and detectors.
 
					 
				   | 
				 
			   
			  Limitations
			  
				-  The instrument uses some kind of magic called "column evaluation" 
				  to determine pneumatic resistance of the column. The user don't 
				  have to enter the column parameters, but it is hard to guess, 
				  which is column length and id is in the box. 
 
				- The instrument can not work in carrier velocity programming 
				  mode.
 
				- FID electrometer cable too long.
 
				- Signal dynamic range is not wide as Agilent 
				  / HP-6890 , Shimadzu GC-2010, 
				  Crystall-5000. 
 
			   
			  UniChrom specific
			  Gas chromatographs "Trace-2000" is connected 
				to PC via serial port. UniChrom 
				drivers supports several such devices (up to 16) 
				simultaneously. UniChrom provides full remote control for that 
				device either for thermo and pneumatic channels.  
			  
				  
This instrument driver is designed as "Networked 
Chromatograph" 
			   
			  Since the instrument has the same configuration model as Agilent 
				HP-6890 , the zone 
				remapping, which is typical for instruments with limited number 
				of gas regulators, is not required.  
	   |