TraceDec® - Contactless Conductivity Detector for
Liquid Chromatography and Capillary Electrophoresis
Producer: Innovative Sensor Technologies GmbH. Austria
Yes it works with UniChrom!
FEATURES
| Capillary Electrophoresis: | The detector can be placed at any position along the separation capillary (I.D. 5-175µm). |
| Liquid Chromatography: | A PEEK tube (O.D. <400µm) is used for contactless conductivity detection in liquid chromatography (HPLC or IC) |
| Analog output: | FS 0-1V to an A/D converter to be used with a commercial CE or HPLC software. WARNING: Please use only a high performance A/D converter otherwise the performance of the detector will be reduced! |
| Digital output: | Besides a standard analog output for use with any AD converter, the TraceDec contactless conductivity detector works with UniChrom software using the MSS-ADC driver. |
Specifications:
| Operational Specifications Eluent:1mM KCI (ID100µm) | Drift:Less than 30 ppm /°C (ambient) | Noise:Less than 5 ppm of FS |
| Interfaces | Analog Output:
0 to 1V (FS) |
Digital Output:
RS232 57600 Baud |
| Environmental Specifications | Operating temperature: 18 to 30°C |
Relative humidity:
45 to 85% |
| Electrical Specifications | Power:
30VA 115/230VAC60/50Hz |
Protection Class:
Class I/IPXO |
| Mechanical Specifications | Dim.(H/L/W): 105/250/250mm | Weight: 3kg |
| Sensor |  |
Dim.(H/L/W)10/28/23mm Capillary O.D...max.400µm non-conducting material |